This is the replacement glass bubbler for the XVape Vista Mini 2. Having spare parts is ideal in case you lose or break the original. The bubbler is made from handblown, borosilicate glass and has a red line on the side to show you the optimal level for water. This piece does not include the mouthpiece or carb cap, it is solely the bubbler. This glass bubbler is not meant for other vaporizers, it is meant for the Vista Mini 2 exclusively.
This is the replacement 510/EGO Adapter and Mouthpiece for the Huni Badger, it is the same as the one included in the kit. This threads directly onto the HB to be used as a mouthpiece. It can also be attached to most 510/EGO bubblers or accessories, like the Huniguide Bubbler. When not in use it can be stored discreetly into the magnetic cap.
This is the replacement mouthpiece for the V-Tower whip. Made from glass, the mouthpiece is easy to clean and provides superior flavourovertypical plastic or metal pieces commonly used on other devices.If you’re struggling to remove the old or broken piece out of your whip, try submerging it in some hot water for a bit to loosen it up.
Randy’s Chill is made from lightweight aluminum and is the only vaporizer that has a freezable tube. It works similar to a water pipe’s ice catcher without the mess. It offers exceptional flavour that’s easy to achieve with the chilled tube. Freeze the tube upright in the freezer for at least 15 minutes before use.
The Chill is a 2-in-1 vaporizer, which allows you to use dry herb and extracts. The dry herb attachment is a ceramic plate with a quartz cup and has 3 temperature settings. The three settings are low, medium and high and are colour coded as follows, Red: 212-392⁰F (100-200⁰C), Green: 450-572⁰F (232-300⁰C) and White: 600-752⁰F (315-400⁰C). The concentrate attachment is a dual quartz coil with a quartz cup and has 3 temperature settings. The three settings are low, medium and high and are colour coded as follows, Red: 315-450⁰F (157-232⁰C), Green: 450-600⁰F (232-315⁰C), and White: 600-900⁰F (315-482⁰F).
Swapping between the coils is a breeze with the magnetic coil chamber. The bottom of the Chill acts as a storage compartment and can fit an extra coil and the included metal tool. Randy’s Chill also comes equipped with an aqua bubbler, that provides portable water filtration. The aqua bubbler mouthpiece is especially handy when you don’t have access to a freezer to chill your regular mouthpiece.
To use the device: Click the button 5 times to turn the unit ON/OFF. Press the button quickly 3 times to toggle between temperatures. Hold the button down to draw on the Chill. The device shuts off after 1 minute of inactivity. The Micro USB charger allows for the unit to be charged easily and efficiently.
For over 20 years Storz and Bickel has been the leading manufacturer in vaporizers. They are the most trusted and innovative company, bringing you the gold standard in stationary, portable and medical devices. The Crafty+ is the newest addition to their catalogue, making improvements upon the already sought after portable vaporizer The Crafty.
The Crafty+ is a portable vaporizer that utilizes convection and conduction heating. This brings you the flavor profile you want while expertly heating the ground material evenly and efficiently. Unlike other devices which tend to get clogged or need a constant stirring to maintain air flow the Crafty+ has managed to deliver phenomenal airflow throughout your entire session.
The cooling unit lessens the heat from the vapor to bring you smooth and tasty flavor. It’s made from PEEK, a quality, food-grade and heat resistant plastic. The Crafty+ has been upgraded to bring you enhanced electronics and circuit board. They also changed the exterior for a more ergonomic grip.
The Crafty+ can reach the desired temperature in under a minute. This is 30% faster than what the original Crafty was capable of. The device uses single button control, allowing you to turn the unit on and off as well as use the included pre-set temperatures. The super-boost setting is achieved by pressing the power button three times to get to the maximum heat of 210⁰C/410⁰F. The Crafty+ has a remote control app for your phone which lets you customize your session with new temperatures and extend the auto-off function. It also lets you turn on unit and heat up to set temperature remotely. The app comes with a locate your device feature, so you can track it down if you’ve misplaced it.
Bringing you the quality vapor you’re accustomed to with Storz & Bickel products and a sleek, portable design the Crafty+ is the ultimate in high end vaporizers.
Contents: 1 pc. CRAFTY+ Vaporizer 1 pc. USB Cable 3 pcs. Base Seal Ring, small 3 pcs. Normal Screen, small 3 pcs. Coarse Screen, small 2 pcs. Drip Pad, small 1 pc. Dosing Capsule 1 pc. Cleaning Brush 1 pc. Instruction for Use (concise) 1 pc. Safety Instructions
This is the replacement Screen pack for the Randy’s Chill vaporizer. It adds protection against debris clogging up the device and getting in places you don’t want it to. Make sure the screens are cleaned or replaced regularly. The screen is there to provide cleaner, smoother hits. If the screen isn’t cleaned or replaced often it will be hard to pull and you won’t get as large of a hit. These screens are easily cleaned with 99% alcohol or any of Randy’s Cleaners.
The icicle is an extendable and freezable tube for Randy’s Chill vaporizer. This piece is ideal because it stays colder for a longer period of time. This glass tube is made from handblown borosilicate glass and is 5.5” in length. Even when the tube isn’t frozen the extra length provides a cooler vapor than the regular tube. This glass piece is easily cleaned with 99% alcohol or any of Randy’s Cleaners.
This sleek and stylish portable herbal vaporizer is perfect for on-the-go and home sessions. Aurora’s Davinci iQ utilizes conduction heating and has a zirconia ceramic air path for clean, smooth draws. The Bluetooth app offers full customization including changing preferences for the 3 session settings, Smart Path, Precision and Boost. You can also use it to turn the device on! The temperature can be adjusted between 121-222⁰C (250-420⁰F) and the unit will reach desired temperature in roughly 16 seconds. The iQ runs for roughly 1.5 hours and can be fully charged in 3 hours. It can also be used while charging. The removable and replaceable battery used is 18650. The iQ is turned ON/OFF by clicking the button 5 times, and clicking once will switch between heating modes. It is recommended to turn unit on to hottest heat setting and let it run for a full cycle before initial use – this helps burn off any debris from manufacturing.
This is the Concentrate Coil Attachment replacement for Randy’s Chill vaporizer. It has dual quartz heating rods within a quartz cup. The more coils the piece has, the more intense the heat will be and the faster it will heat up. It’s a good idea to have a spare atomizer before yours needs to be replaced. There is no specific length of time that your coil will last, as there are a number of factors to take into account. How often you use and clean the device and the product you put in the chamber will affect the period with which it lasts. Be cautious when depositing material as moving the metal wiring can cause the atomizer to stop functioning.
Hailing from Canada, Arizer wanted to make a small, portable vaporizer without sacrificing function and flavour. Utilizing a hybrid conduction/convection heating method and a glass mouthpiece equals the recipe for smooth, tasty hits. The unit has 5 pre-set temperatures at optimal range and the removable battery is able to be charged in the unit or with a separate dual-battery charger. Included are caps for pre-packing a bowl and a carrying case for portability.
To use: Press down the middle of the button to turn ON/OFF. When turning on light flashes and unit beeps. Choose temperature by using the up and down arrows – different temperatures are shown by different colour lights. Once unit is heated the light will stop flashing and glow solid. Before using device initially heat the unit up to the hottest setting (red) and let it sit for a full cycle. After about ten minutes the device will shut off by utilizing the auto-shutoff. This allows for the pressure fitting to expand and the glass mouthpiece to slide in perfectly. After the initial run, the unit is ready to use! The more discreet you’re aiming to be, and the amount of moisture content in your herb are two of the main factors in choosing the right temperature setting. Remember it’s always better to start off low and add more heat as the session progresses. Green (middle heat) is a personal favourite! While waiting for the device to heat up, you can start packing your bowl. Make sure your herb is ground up so heat can pass through it easily. Loosely pack your bowl and turn device upside down to insert mouthpiece/bowl. You can attach your mouthpiece before or after unit is fully heated. Device will shut off after 10 minutes. Leave unit off and allow to cool for increased longevity of the vaporizer. Pro tip: Long, light draws are more effective than short, hard pulls. When herb is finished it will lose its flavour and will be a dark brown colour, however it will still be the same consistency as when you put it in. Save your vaporized material for making edibles. Vaporizing has “decarboxylated” the herb for you – you’re ready to bake!
This is the replacement Grommet and Screen combination for the Randy’s Chill vaporizer. It adds protection against debris clogging up the device and getting in places you don’t want it to. Make sure this piece (the screen especially) is cleaned on a regular basis to provide cleaner, and smoother hits. If the screen isn’t cleaned it will be harder to pull and you won’t get as large of a hit. Using 99% alcohol or any Randy’s Cleaner on the screen will easily remove grime, and the Orange Label cleaner is safe for the Rubber Grommet.
This is the replacement freezable glass tube for Randy’s Chill vaporizer. The device comes equipped with a 3” handblown borosilicate glass tube, but it’s recommended to have an additional tube in case the glass breaks and to always have one tube chilled. This glass piece is easily cleaned with 99% alcohol or any of Randy’s Cleaners.
This is the Dry Herb Coil replacement for Randy’s Chill vaporizer. It is a ceramic plated coil within a quartz cup. Ceramic is the best material to use and it provides optimal flavour. It’s a good idea to have a spare atomizer before yours needs to be replaced. There is no specific length of time that your coil will last, as there are a number of factors to take into account. How often you use and clean the device and the product you put in the chamber will affect the period with which it lasts.
This is the replacement Aqua Bubbler for the Randy’s Chill vaporizer. It provides portable water filtration and comes in handy when your regular tube isn’t chilled. When the bubbler is filled with water it makes the vapor cooler and smoother. Be sure to replace the water regularly. The Aqua Bubbler is made from handblown borosilicate glass and is 3” in length. This glass piece is easily cleaned with 99% alcohol or any of the Randy’s Cleaners.