This is the replacement 5 pack of ceramic CTECH coils for the Shatterizer. Ceramic coils heat up slowly but retain heat much better than quartz. The bottom utilizes a 510 thread to fit easily on the unit. Coil works best if the concentrate is placed at the bottom. Caps for the coils are sold separately.
This is the replacement heating coil for the XVape Vista Mini 2. Having spare parts is always a good idea in case you lose or burn through the original. This atomizer has 510 threading, and is a quartz bucket style. Quartz is an ideal material as it can cope with high temperatures over a long period of time. It retains heat well, with less risk of breaking than other materials. This heating coil is not meant for other vaporizers, it is meant for the Vista Mini 2 exclusively.
This is the replacement carb cap for the XVape Vista Mini 2. Having spare parts is ideal in case you lose or break the original. This carb cap is made from handblown, borosilicate glass and features a hole in the top to allow your extracts to vaporize properly. The carb cap fits solidly above the heating coil, with an air tight seal. This carb cap is meant for the Vista Mini 2, any use on other rigs or vaporizers is up to the discretion of the customer and is not recommended.
This is the replacement Grommet and Screen combination for the Randy’s Chill vaporizer. It adds protection against debris clogging up the device and getting in places you don’t want it to. Make sure this piece (the screen especially) is cleaned on a regular basis to provide cleaner, and smoother hits. If the screen isn’t cleaned it will be harder to pull and you won’t get as large of a hit. Using 99% alcohol or any Randy’s Cleaner on the screen will easily remove grime, and the Orange Label cleaner is safe for the Rubber Grommet.
This is the replacement Screen pack for the Randy’s Chill vaporizer. It adds protection against debris clogging up the device and getting in places you don’t want it to. Make sure the screens are cleaned or replaced regularly. The screen is there to provide cleaner, smoother hits. If the screen isn’t cleaned or replaced often it will be hard to pull and you won’t get as large of a hit. These screens are easily cleaned with 99% alcohol or any of Randy’s Cleaners.
The Huni Badger Low Temp tip is a replacement for the included tips with the Huni Badger kit. They are ideal for producing quality flavour and enjoying a full terpene profile by utilizing a lower temperature. The Low Temp tip is less likely to burn your extracts and provides a softer hit than the High temp tip.
This is the replacement glass top for the Shatterizer. It fits over the coils of the device securely and helps cool the vapor before it is inhaled. This piece will not work on its own and needs the unit to function. Glass won’t heat up as much as metal but is more fragile. Easily clean this top with 99% alcohol.
This is the replacement 5 pack of dual quartz QDC coils for the Shatterizer. Quartz coils heat up quickly but do not retain heat as well as ceramic. The bottom utilizes a 510 thread to fit easily on the unit. Add concentrate gently, ensuring not to damage coils. Caps for the coils are sold separately.
This is the replacement freezable glass tube for Randy’s Chill vaporizer. The device comes equipped with a 3” handblown borosilicate glass tube, but it’s recommended to have an additional tube in case the glass breaks and to always have one tube chilled. This glass piece is easily cleaned with 99% alcohol or any of Randy’s Cleaners.
This is the Dry Herb Coil replacement for Randy’s Chill vaporizer. It is a ceramic plated coil within a quartz cup. Ceramic is the best material to use and it provides optimal flavour. It’s a good idea to have a spare atomizer before yours needs to be replaced. There is no specific length of time that your coil will last, as there are a number of factors to take into account. How often you use and clean the device and the product you put in the chamber will affect the period with which it lasts.
The DRAY Vaporizer mouthpiece was made to fit Mig Dray Vaporizer. The filter works to keep the processes clean, full flavor, smooth, and enjoyable. We've got you covered!
1 DRAY mouthpiece
RGR Canada Inc.
Honey Straw Attachment for Prohibited In the 5th Degree
This is the replacementall-glass tube for the Argo. This size tube is unique from other portable Arizer vaporizers, it will not work for the other units. The tube has a built-in screen to maximize efficiency and effectiveness. Easily cleaned with 99% alcohol, glass ensures a clean, flavourful hit.
This is the Concentrate Coil Attachment replacement for Randy’s Chill vaporizer. It has dual quartz heating rods within a quartz cup. The more coils the piece has, the more intense the heat will be and the faster it will heat up. It’s a good idea to have a spare atomizer before yours needs to be replaced. There is no specific length of time that your coil will last, as there are a number of factors to take into account. How often you use and clean the device and the product you put in the chamber will affect the period with which it lasts. Be cautious when depositing material as moving the metal wiring can cause the atomizer to stop functioning.
The icicle is an extendable and freezable tube for Randy’s Chill vaporizer. This piece is ideal because it stays colder for a longer period of time. This glass tube is made from handblown borosilicate glass and is 5.5” in length. Even when the tube isn’t frozen the extra length provides a cooler vapor than the regular tube. This glass piece is easily cleaned with 99% alcohol or any of Randy’s Cleaners.
This is the replacement Aqua Bubbler for the Randy’s Chill vaporizer. It provides portable water filtration and comes in handy when your regular tube isn’t chilled. When the bubbler is filled with water it makes the vapor cooler and smoother. Be sure to replace the water regularly. The Aqua Bubbler is made from handblown borosilicate glass and is 3” in length. This glass piece is easily cleaned with 99% alcohol or any of the Randy’s Cleaners.
These are the replacement coil caps for the Shatterizer. They thread directly onto the coils. The three different styles have either Sativa, Indica or Hybrid on the cap so you can easily keep track of what concentrate is inside.
This is the replacement aluminum top for the Shatterizer. It fits over the coils of the device securely and helps cool the vapor before it is inhaled. This piece will not work on its own and needs the unit to function. The metal version is much more durable than the glass and is easily cleaned with 99& alcohol.
